current transducer 4 to 20ma output factory

#Current transducer 4 to 20ma output factory series

Meanwhile, this transducer has been developed in manner to offer complete protection against excessive current. That isolated ac current transducer is designed to monitor electric motors. Its input to output terminals is in 2.0KV isolation to avoid ripple and noise interference. This current transducer has excellent load resistance capacity and gives excellent output. This miniature, on-board, transducer amplifier is capable of supplying excitation voltage and amplifying millivolt signals from strain gauge based transducers. HIC AAC AC Current signal transmitter can converts the ac current signal from AC current transducer into standard dc 4-20ma current signal. Current measuring transducer for 1 A and 5 A AC, the output signal 0.20 mA or 4.20 mA, can be configured using a DIP switch with an operating mode. It operates at its peak level for years and has excellent accuracy. This transducer is reputed for its best performance and technically advanced components. H321 4-20mA Out Current Transducer, H321SP Split core, amperage: 0 to factory set maximum span calibration. Given our vast industry experience, we are offering AC Voltage Transducer to our clients. Box Dimension: 70 x 100 x 110 mm (Single).

Calibration Feature: Digital Calibration.

Galvanic Isolation between input & output: Available.

Measurement System: 3 Phase, 3 wire (or) 3 Phase, 4 wire HT Application.

Voltage Input: 80 - 520V AC line to line for LT.

But the best part, it fits your budget completely. This transducer is able to work in proper manner in different conditions. It has excellent accuracy and is able to offer complete resistance to load. This transducer is able to function in an excellent manner for years. It is developed in an outstanding manner. These current transducers have jumper-selectable current input ranges and industry standard 420 mA, 05 VDC or 010 VDC outputs.

#Current transducer 4 to 20ma output factory series

Our organization is highly famous in offering Power Transducer to our clients. The AST4000 series 4-20mA / voltage pressure transducer is an OEM pressure transmitter that includes a welded stainless steel housing and many electrical. Series SCT Current Transformer SCT10-100, Current transducer, split core, 4-20 mA output, range 30/60/120A, 4-5 Weeks. Box Dimension :70 x 100 x 110 mm (Single) 70 x 110 x 150 mm (Dual Output).Calibration Feature :Digital Calibration Pressure ranges from 200 mbar to 350 bar (3 to 5,000 psi) Gauge, Absolute and Differential reference 4-20 mA and configurable voltage output Total Accuracy. Loop-powered analog current sensor with integral start/stop.Burden on Voltage and Current Input:0.2VA.current : 4 times continuous 50 times / 1 sec. Factory-special, fixed ranges of 2.0000 ohm, 2.0000 Mohm. Surge and Impulse test : 4 KV 1.2/50 μs It is factory calibrated for five jumper selectable resistance ranges from 20.000 ohm to 200.00 kohm.Galvanic Isolation between input & output :Available.Measurement System : 3 Phase, 3 wire (or) 3 Phase, 4 wire HT Application 3 Phase, 4 wire LT Application.Voltage Input : 80 - 520V AC line to line for LT.

The 4-20mA DC output is proportional to the RMS value of the primary current. The JS36S-RMS split-core current transducer was designed for the electronic measurement of AC waveform currents, with galvanic isolation between the primary circuit (power) and the secondary circuit (measurement). The JS36S-RMS Split-Core Current Transducer measures up to 500A and outputs a proportional 4-20mA output signal.